SANTA CLARA, Calif. – August 16, 2023 – Marvell Technology, Inc. (NASDAQ: MRVL), a leader in data infrastructure semiconductor solutions, today introduced its technology platform for 5nm multi-gigabit copper Ethernet PHYs to enable enterprise network equipment manufacturers and others to meet the exacting energy efficiency and performance targets of next generation multi-gigabit network technologies such as Wi-Fi 7.
A critical technology found across data infrastructure networks, PHYs handle the transfer of digital data between the copper, fiberoptic and wireless systems that collectively make up today’s networks. Any given packet will likely pass through a multitude of PHYs during a single transmission through a network. Innovations in PHY technology are critical to deliver the enhanced bandwidth, reach, link performance, and security required by the exponentially growing interconnect needs of the modern data infrastructure.
Marvell’s 5nm multi-gig PHY platform is based around optimized circuit designs, custom digital logic, enhanced DSP algorithms and other innovations to deliver 10 Gbps performance at half the power of previous generation devices from Marvell. The platform will serve as the building block for additional standalone PHYs, integrated SoCs, and custom ASICs optimized for specific markets and applications.
Reducing PHY power consumption gives equipment manufacturers greater flexibility in product design: heat sinks and fans can be reduced in size or eliminated, a greater portion of the power envelope can be redirected to other features to boost performance, and/or overall power can be reduced to help end users meet sustainable IT goals. A leader in multi-gigabit PHYs with four generations of PHYs already in production, Marvell’s Alaska M multi-gigabit PHYs and the Prestera® 2500, 3500, and 4500 series switches have been purpose-built to accelerate the multi-gigabit transition in enterprise networks.
“PHYs are a necessary ingredient of digital networks and Marvell is a leading supplier of this technology,” said Joseph Byrne, Editor in Chief of Microprocessor Report. “Innovations like this will play an important part in ensuring access points and other edge devices can continue to increase in performance and capacity.”
Breakthrough PHY Performance for Wi-Fi 7
The Alaska M 3610 Ethernet PHY, the first chip based on the new platform, is a single port multi-gigabit PHY to enable the multi-gigabit backhaul links for improving Wi-Fi performance. Wi-Fi 7 will provide over four times the maximum aggregate data rate of Wi-Fi 6 and 6E and nearly seven times the rate of Wi-Fi 5, a leap in performance that will enable more reliable connections and emerging applications such as augmented reality.
The increased data throughput supported by Wi-Fi 7 will require multiple backhaul links with PHYs operating at speeds up to 10 Gbps. Delivering that bandwidth will demand a transformative improvement in the performance and power efficiency of the backhaul links connecting Wi-Fi access points to the rest of the network. Consuming under 1W, Alaska M 3610 enables manufacturers to meet these performance goals for the adoption of Wi-Fi 7.
Wi-Fi 7 enterprise access point shipments are expected to grow from a few thousand shipments this year to over 13 million by 2027 and constitute the largest segment of enterprise W-Fi1. This upgrade cycle will accelerate the conversion of enterprise access networks from 1 Gbps to multi-gigabit speeds.
“This is the first time in over a decade that we’ve seen more than a doubling of bandwidth in Wi-Fi. It’s exciting,” said Chris DePuy, co-founder of 650 Group, adding that Wi-Fi 7 access points should begin shipping in late 2023/early 2024 and constitute approximately 40% of unit shipments of Wi-Fi enterprise access points by 2027.
The Alaska M 3610 also includes IEEE 802.1AE 256-bit hardware-based link-layer Media Access Control (MACsec) for flexible encryption deployment while eliminating the cost and power burden of including this functionality in an access point’s system-on-chip. MACsec is critical to a layered enterprise security implementation by providing end-to-end protection across a connection to prevent attacks such as denial-of-service, man-in-the-middle, masquerading, and passive wiretapping.
“Our first to market new 5nm multi-gigabit copper PHY platform delivers a leap in performance and capabilities over those found on the market today,” said Venu Balasubramonian, vice president of product marketing, High Speed Connectivity and PHY Business Unit at Marvell. “PHY innovation is absolutely essential for meeting the bandwidth demands of AI, AR, remote work and other high-bandwidth applications. Marvell has made a strong commitment to PHY development and to maintaining a leadership position in this technology area to deliver solutions that address the emerging needs of our customers.”
上市日期
The Marvell 5nm Alaska M 3610 10 Gbps Ethernet PHY is sampling now to select customers.
关于 Marvell
为了通过数据基础设施技术实现全球互联的愿景,我们正在构建非常强大的基础解决方案: 我们与客户携手。 二十五年来,Marvell 深受世界位居前列的技术公司的信赖,以客户当前需求和未来理想为设计路线,运用专业半导体解决方案实现对全球数据的移动、存储、处理与保护。 通过深度协作、践行透明化的沟通方式,我们致力于促进未来企业、云、汽车和运营商架构的不断转型与完善。
###
1. 650 Group
Marvell 和 M 徽标是美满电子科技或其附属公司的商标。 请访问 www.marvell.com 网站获取美满电子科技商标的完整列表。 其他名称与品牌可能是其他方财产。
本新闻稿包含联邦证券法界定的前瞻性声明,该等声明涉及风险和不确定性。 前瞻性声明包括但不限于任何可能预测、预估、表明或暗示未来事件或成就的声明。 实际事件或结果可能与本新闻稿中预期的事件或结果存在重大差异。 前瞻性声明仅为预测,且受难以预测的风险、不确定性和假设的影响,这些风险、不确定性和假设包括 Marvell 的 10-K 年度报表中的“风险因素”部分、10-Q 季度报表以及 Marvell 不时向美国证券交易委员会 (Securities and Exchange Commission, SEC) 提交的其他文件中提及的内容。前瞻性声明仅在发表当日有效。 谨提醒读者不要过分依赖前瞻性声明,无论是由于新信息、未来事件还是其他原因,任何人都没有义务更新或修改任何此类前瞻性声明。
欲了解更多详情,请联系:
Michael Kanellos
pr@marvell.com